 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Electronic Circuit Design Help (Schematic)
1) 2-bit DIP switch is connected to a adder chip. (74283)
*The 2 bit DIP switch will act like a Round Score. 2) If push button is pressed, the Round Score is added to the previous output of the adder hence will give you the Total Score. 3) If Total score >= 8 green led will light up otherwise Red led will light up. *we can ignore overflows. Is there anyone can come out with the schematic design? |
||||
Check out some similar questions!
What would it's output power be to nearest watt?
How to hook a motions sensor #555-28027 to a hand held Motorola tnp:t8500baxusvoxx?
Where do I start if I need to make a scematic to create a circuit that has a 100 ohm resistor and it gives 3 1/2 volts - plus or minus 5%. I can use as many 1.5 volt batteries as needed.
Hi. I am currently working on the electrical portion of my basement remodel and wanted some input on my circuits. For starters I have 200 amp service and plenty of room in my box, so space is not a concern. I am planning on having a rec room, utility room, laundry room, bathroom, and wet bar. ...
I have previously wired a storage room in my basement, and tied into an existing circuit. The storage room run is switched, with 5 track lights, using a total of 600W maximum, with 3-4 receptacles at the end of the run. I am now in the process of finishing the larger basement, and would like...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
