Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing tub taps & diverter spout
[ 2 Answers ]
:confused: My tub spout is starting to give me problems, I would like to change it along with the taps, but the problem is the previous owner tiled the whole bathroom all the way around the room. Is it possible to replace them without doing some damage to the tiles?
Trying to replace Weird Size Tub Spout Diverter
[ 3 Answers ]
When I pull up my Diverter for my shower, It sprays a lot and cuts down on my shower's stream. So I decided to replace it yesterday. I determined that it is the screw on type and removed it. But when I took it off I noticed that there was a 1/2 inch copper pipe with a 1 1/4 inch thread attached...
Water leaking from spout when diverter pulled
[ 3 Answers ]
In the tub, when the shower diverter is pulled, a large amount of water is running out of the tub spout, lowering the water pressure in the shower head. In the past, the "normal" or expected amount of water came out of the spout, but this amount is much larger. Is there a way to replace the...
Moen faucet diverter
[ 2 Answers ]
I have a 12 year old Moen single lever faucet in my kitchen. About one week ago, it started showing signs of a problem. When I turn it on after it hasn't been used for an hour or two, the water pressure is very low, almost none. If I turn it on and off a few times, then the pressure gets better....
Diverter valve for Moen faucet
[ 2 Answers ]
Hi, I need to replace the diverter valve (1225) on the kitchen faucet. Do I need to remove the entire faucet to do this? If so how do I do this? Thanks View more questions Search
|