Check out some similar questions!
Sayco stem 16138B (11B-7H) expensive
[ 4 Answers ]
I am looking for a Sayco Stem 16138B (11B-7H) and the cold one too. Well these things start dripping a lot within some number of years 2-5 and then I replace them. I have replaced them about 3 times already and those times the stems where about $26 each. Well now the only ones I can find are at...
Sayco diverter stem
[ 6 Answers ]
I'm working on old apartment building.. trying to replace old sayco diverter stem.the newer one I bought at a plumbing house look like a perfect match but when I install part of the water still flows out tub spout when it is diverted to shower.. not many moving parts... hard to see where problem...
Sayco diverter valve
[ 1 Answers ]
Replaced all 3 valves in tub. When the cold water is turned on 100% diverts to shower head or the tub(works as designed). When the hot water is turned on (cold off) about 20% of water comes out to tub while the remainder goes to shower head. If diverter is turned to tub it works as designed. What...
SAYCO Stem Valves
[ 2 Answers ]
As a Jack-of-all-trades for an apartment complex, I sometimes have to worn stem valves for bathtubs faucets. The valves are made by SAYCO. The valves controlling the hot water seems to fail most. Whenever I need a hot water stem, every hardware store on the planet is sold out. However, they all...
Exchange of an old sayco diverter stem
[ 5 Answers ]
My faucet on my bath top was leaking.It is a three handle system. I took the stems out and replaced the O-rings. Nothing is leaking anymore, but when the diverter is insalled, part of the water still flows out the tub spout when it is diverted to shower. The diverter parts are fine. Is there a... View more questions Search
Add your answer here.
|