 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sayco diverter valve
Replaced all 3 valves in tub. When the cold water is turned on 100% diverts to shower head or the tub(works as designed). When the hot water is turned on (cold off) about 20% of water comes out to tub while the remainder goes to shower head. If diverter is turned to tub it works as designed. What do I need to look for to correct this problem?
|
||||
|
||||
|
I had the same water still going out the spigot when the shower was on problem. I got a replacement kit and the new stem still had the same symptom. I was looking online and found a picture of the part that showed two o-rings and a rubber washer. My unit just had the one o-ring and the instructions didn't say anything about the second o-ring. It turns out that second o-ring is the solution and the old unit had the o-ring fail so it was just in tiny pieces when I took the thing apart. I found that missing o-ring in the bottom of the bag of the replacement kit and it works great now. Good luck! Jon Boyd Ann Arbor real estate Exclusive Buyer's Agent |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm working on old apartment building.. trying to replace old sayco diverter stem.the newer one I bought at a plumbing house look like a perfect match but when I install part of the water still flows out tub spout when it is diverted to shower.. not many moving parts... hard to see where problem...
Hi, new here. I have three valves in my bathroom shower, hot cold and diverter for shower head. I recently replaced all three, they are phiser. Following replacement all worked fine the diverter valve became hard to turn and is not very difficult to open and close. It feels like I'm going to...
My faucet on my bath top was leaking.It is a three handle system. I took the stems out and replaced the O-rings. Nothing is leaking anymore, but when the diverter is insalled, part of the water still flows out the tub spout when it is diverted to shower. The diverter parts are fine. Is there a...
My shower has three knobs and the one in the middle diverts the water flow from the tub spout to the shower. I think that means I have a 3 valve diverter valve, if not please correct me. When I turn the diverter knob so that the water comes out of the shower, there is still significant water...
I was washing the dishes and when I went to press to spray nozzle, no water came out. Then when I went to use the faucet, no water came out as well. I think this may have to do with the diverter in the spray nozzle? What are your thoughts? And how do you remove the spray nozzle?
View more questions Search
|
