 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Amplifying TV modulator
I'm building a low power TV transmitter using rf modulator for my project, I bought an IC MC1374 and doing the circuit presented in the data sheet of the IC, my goal is to have two or more channels, better audio/video quality, wireless, specific channell(3,4)... after constructing the circuit, I tested it using my TV set but I couldn't get a good reception, the audio and video was not so clear as what I xpected, Considering that I used only whip antenna and placed it near the receiver antenna but still I couldn't.I guess I hv to amplify the modulator but how? is there a problem with my transmitting antenna? Or was it with the circuit? Please help me if you hve knowledge about this.. Another problem was that the other channel was tuned to CATV.. Please help me to achv my goal.. Thank you..
|
||||
Check out some similar questions!
I just bought an rf modulator so I could hook my ps2 to an older TV. I hooked the av cables from the ps2 to the modulator, and the coaxial cable from the mod to the TV. All the channels are in sync and the power is on for everything. Yet nothing works. Am I missing a step?
I need to install a dvd/cd surround system(pioneer) to my television. I have cable, I just do not use the digital converter box. I have the RF modulator but can't seem to get the TV to come out through the surround system. Please help!
Has anyone heard of a Pilotuner Frquency Modulator? I think it has something to do with Ham Radios but I don't really know. A friend of mine gave it to me and I wanted to know something about it. It is old and in a wooden case. I was thinking about restoring it.
I have MP3 Fm Modulator in my Car. I am using Flash memory to play MP3 song files. The problem is that it can play some files some can not. In my 4GB Flash memory there is near about 30 mp3 song (4 to 5MB) & 4 to 5 MP3 lecture Files(10 to 13MB )what is the reason why not all the files can be...
I am trying to tune a RF modulator to my TV. The set up will not retain the selected channel on the modulator, that is if I can get the TV to recognise the modulator channel at all. Sometimes after turning off the power I can get the modulator test signal when the power is restored, but again it is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
