Ask Experts Questions for FREE Help !
Ask
    ColdInCO's Avatar
    ColdInCO Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2012, 11:40 AM
    Bryant furnace - error code 34 - trying to find flame sensor to clean it...
    Hello,

    Possibly a stupid question, but where exactly is the flame sensor on this furnace?

    Model: 340AAV036060AASA

    Thanks so much!
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Feb 3, 2012, 12:17 PM
    Normally on opposite end from the igniter, most have only 1 wire going to it,
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

On a 1990's vintage Lennox gas heater, how do I clean the flame sensor? The furnace [ 0 Answers ]

Operates intermittently, it starts up, heats for several minutes, then shuts off. Doesn't seem to be reaching full temperature either.

Bryant 90 plus furnace error code 31 [ 0 Answers ]

I have 9 year old Byrant 90 Plus Furnace, not working, on LED Code is 31. Need help to resolve th eissue.

Bryant furnace error code 31 [ 3 Answers ]

I have a Bryant 350MAV048100 furnace. It runs for 15 minutes, cycles off and then cycles on and shows an error code 31. I've cleaned out the intake /exhaust lines, but still have the problem.

Bryant 95 furnace with code 42 error [ 0 Answers ]

Less then a year old. I'm getting an intermittent 42 error. After turning the power back on to the unit it goes through its self check mode and goes back to a constant light, indicating no problems. Then a day or two later 42 again. Both intake and exhaust pipes are clear, new air filter. Any...

Flame sensor in a bryant 80 plus furnace [ 1 Answers ]

I have a Bryant 80 plus furnace. I've been having a problem for about a month, now. I have noticed that sometimes not all three burners have a flame after the gas valve releases the gas from the manifold, which causes the system to lock after three or four attempts. The very first burner, from...

View more questions Search