Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman furnace troubleshooting?
[ 0 Answers ]
I have a goodman mid efficiency furnace that was installed in my house in 2007. I have to clean the heat sensor in it about 2 to 3 times a year. I was told by a technician that this is normal for these furnaces. But even after I clean the sensor, the furnace still seems to run all the time (a...
Goodman Furnace Troubleshooting?
[ 3 Answers ]
How can you tell if your heat exchanger is bad? I am getting high Co2 reading. And the flames seems to be blowing to strong, or could that be the gas valve, or dose it need adjustment in the tudes? I don't think the chinney is plugged.
Goodman Furnace Troubleshooting?
[ 1 Answers ]
I have a goodman furnace model # gmh80703ancb it is only 3 years old. The unit itself works great but the blower isn't working. Is there something I can do to check it before calling to get it serviced? Its getting cold, please help
Goodman furnace troubleshooting
[ 3 Answers ]
Goodman 95% 2 stage furnace. LED code says pressure switch is stuck open. 1) Changed switch. 2) Jumped Limit switch. 3) Changed PCB. Same error code. 3 blinks "code says pressure switch is stuck open" Can You Guide me further
Troubleshooting goodman furnace
[ 1 Answers ]
The flame sensor keep burning out and only run for a couple of minute . Maybe the condensation trap is fully of dirt View more questions Search
|