 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool LXR6432JQ0 washer drains and spins at the same time?
My washing machine seemed to start spinning before it had completely drained. The basin had a lot of water in it, causing the machine to struggle to spin, obviously. I am concerned about it completely wearing out. We were told to check for an obstruction in the tube as it might not be draining properly. No problems there. The water gushes out just like it always has.
After paying closer attention, I discovered that it starts to spin and drain at the same time. It does this on all cycles. It seems to me that the timing of the cycle steps is off. Do I need a new washer timer? |
||||
Check out some similar questions!
My top load Whirlpool will spin sometimes and sometimes not. Or it will start and then stop. It drains and agitates just fine. If a part is broken, how can it sometimes work?
My Whirlpool washer is old but I haven't had trouble from it until now. Model# A5550XPW7... serial#CX2964691. It leaves water in the tub at the end of the wash and rinse cycle. More water with each cycle. Yesterday I took off the hoses and checked for blockage and nothing. It drained the standing...
After the wash cycle the washer makes a sound but doesn't spin, it does drain the water out though. If you lift the lid and shut it then the spinning starts... anyone have any ideas before I call stupid whirlpool. Thanks Tiffany
My wife had a problem with our Kenmore washer model number 110.26914691 with water all over the floor during a large cycle. I took it outside and checked to see if there were any leaks in the hoses or tub. There were none. I removed the cabinet and ran a small load test cycle. I was able to confirm...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
