 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lux model t101143/psm40 thermostat
I have a blue wire that was connected to w1 on my old thermostat, a yellow wire that was connected to w2, a brown wire that was connected to y2 and a green wire that was connected to rh, where do I attach them on my new thermostat to make it work?
|
||||
Check out some similar questions!
I have an older analog Lennox thermostat and am replacing with a Lux ATX500 thermostat. The Lennox thermostat connections do not match those on the Lux. The Lennox is a 6 wire connection with terminals: F, V, R, X, Y, M The Lux has terminals: G, Y, W, RH, RC The Lux instructions are very...
Need help replacing Honeywell Thermostat chronotherm model 890121 to lux tx1500.
I just had technician check out my central A/C unit. He replaced a fuse and some wiring in the furnace and had the A/C working. He turned it off and on a few times to make sure it was working properly. After a couple tests the thermostat will no longer let the A/C stay on. It turns on and then...
When I turned it on, it wouldn't come on (showed the regular screen though). I changed the AAA batteries but it's still not coming in. I didn't get an owner's manual for the thermostat when I bought the house 9 years ago. The only numbers I see for a hint as to a model are Serial #95029537 (also...
I just purchased LUX TX1500E thermostat to replace old CT87A Honeywell. The Honeywell was wired as follows: green – G, White – RC, Yellow – Y & W and Red – was not label, but I'm assuming this is the 24V power. I did wire the LUX TX1500E as it shown on the schematic for Heating and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
