 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My lux ultra thermostat won't work.
When I turned it on, it wouldn't come on (showed the regular screen though). I changed the AAA batteries but it's still not coming in. I didn't get an owner's manual for the thermostat when I bought the house 9 years ago. The only numbers I see for a hint as to a model are Serial #95029537 (also has a number stamped 9412). Your help please... thank you!
|
||||
Check out some similar questions!
I have an older analog Lennox thermostat and am replacing with a Lux ATX500 thermostat. The Lennox thermostat connections do not match those on the Lux. The Lennox is a 6 wire connection with terminals: F, V, R, X, Y, M The Lux has terminals: G, Y, W, RH, RC The Lux instructions are very...
I have a Lux Ultra 1000 Thermostat, I think that the room temperature it shows is off. It will read 68, but a second thermometer (placed a few inches below it) reads 64. Is there anyway to calibrate the unit, or should I just get a new one?
I have lux ultra 1000 thermostat. When I turned the cooler on, it works fine. However, when I turn the heater on, nothing happened. Please advise what wrong. Thank you. TT
I just purchased LUX TX1500E thermostat to replace old CT87A Honeywell. The Honeywell was wired as follows: green – G, White – RC, Yellow – Y & W and Red – was not label, but I'm assuming this is the 24V power. I did wire the LUX TX1500E as it shown on the schematic for Heating and...
Just insatlled a Lux TX1500 thermostat the fan works the air conditioning works but heat does not. Followed wiring diagram.Not sure what to do or try?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
