 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I got a dc90 ultra high efficiency heating and air
I had my heat on and I wanted to rise the temputure when I did the heater kick on and it started blowing cold air and know I can not get it to go off without turning the power off and then when I turn the power back on it start running again is there a reset botton some where on it
|
||||
Check out some similar questions!
I want to install an ultra-high efficiency water heater (98%+ efficient). The exhaust runs cool enough that the combustion product water vapor condenses in the exhaust line and needs to be drained. My plumber told me that it was impossible to install this heater, because there is no floor drain....
I have a Hiel DC90 ultra efficiency furnace. It has been sitting all summer, and I tried starting it up today. So I turned the thermostat on raised the temperature, the furnace starts up I hear the first click, then I hear the second click, then the pilot ignite's, the inside of the burner box...
The fan runs all the time but the unit never lights or heats. Where are the limit swithches that might need to be re-set?
I've been quoted an arcoaire 16 seer, and gas furnace 95%. Can't seem to find much info on arcoaire. Also received quote on a Goodman. Of the two which brand have your customers had better luck with (long-term performance)? Thank you for your time.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
