Ask Experts Questions for FREE Help !
Ask
    paparic's Avatar
    paparic Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2011, 07:31 PM
    Pressure Switch Code
    Replaced my furnace with a brand new Goodman 95% effient furnace. The LED light is flashing the code for pressure switch. This furnace has not come on at all yet. Can't figure it out.

Check out some similar questions!

Carrier Gas Furnace, Pressure Switch Problems (Model 58MCA) CODE 31 [ 5 Answers ]

I have tried almost everything in my arsenal to try and diagnose the problem. First off I have a Carrier Gas Furnace that is almost 7 years old. Model 58MCA-80 (See attached photo for more information), with pressure switch #HK06NB123. Intermittently I get a Red Flashing Code #31 when the unit...

Ruud Zephyr has pressure switch open code (2 blinks) [ 0 Answers ]

Hello, I have a Ruud Zephyr furnace and it keeps turning off after only about 2 minutes of running. I replaced all of the filters and cleaned the flame sensor. The furnace runs OK for 2 minutes, then clicking begins on the board somewhere and the furnace shuts off. Can someone help me?

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

Troubble code flash 3 times says pressure switch stuck open [ 0 Answers ]

Trouble code flashing 3 times says pressure switch is stuck open tried jumping it out and got no change went to door switch and jumped it out nothing then reinstalled switch and furnace came on but when I put door back on went into trouble code 3 again. Can you help?

Furnace Pressure switch Code [ 0 Answers ]

York Single stage This is the third winter its been running. The last two winters no problems. The control board fault code red light blinking three time which means pressure switch fault the unit will run up to a week with no problems and then it will shutdown with just the blower running I...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.