 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troubble code flash 3 times says pressure switch stuck open
Trouble code flashing 3 times says pressure switch is stuck open tried jumping it out and got no change went to door switch and jumped it out nothing then reinstalled switch and furnace came on but when I put door back on went into trouble code 3 again. Can you help?
|
||||
Check out some similar questions!
Hello, I have a York (forced air) gas furnace that's 9 years old. Every winter it seems like I have to replace the pressure switch ( round switch with 2 connections & air hose). I hear the blower come on, burners ignite and then within a few seconds they go off with the red light flashing 6 times....
I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals
Indicator shows pressure switch stuck open, blew out hoses with light pressure, heard clicking noise, no water present. Blower is working, fan works, furnace still not kicking on.
I have replaced the open limit switch on my furnace four times in the last four years. I just replaced it today, again and the furnace will not kick in unless I turn off the thermostat and restart it. After several attempts it will start, but will run fine a couple of times then I will do the...
My furnace is blinking 4 times indicating that the furnace has an open limit switch. I changed the switch and it is still blinking 4 times indicating the same thing. What else could be wrong or what can I do to fix this problem? ITS COLD!!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
