Ask Experts Questions for FREE Help !
Ask
    ejanota's Avatar
    ejanota Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2011, 12:10 PM
    Sv9500 HSI terminals
    Can someone tell me how to locate the HSI terminals on a Honeywell SV9500 Smart Valve

Check out some similar questions!

Sv9500 his terminal [ 0 Answers ]

Can someone tell me how to locate the his terminal on a honeywell SV9500

Smart valve sv9500 no glow? [ 0 Answers ]

Smart valve sv9500 I have 29volts to the valve and 29v out to the ignite but no glow I have replaced the ignite and still no glow is it the valve. I have also changed the control board and still no glow I starting to think it's the valve can anybody help..

Dual run capacitor(3 terminals).or is single run capacitor(2 terminals) OK? [ 2 Answers ]

Hello all, I have an older Amana HVAC system in my home. Home is 6yrs old. It Appears that my condenser unit was struck by lightning because one of the 3 terminals on the dual run capacitor was blown/melted and all the wires connected to the dual run capacitor were fried (It did storm the...

Where is my filter? SV9500 [ 2 Answers ]

I have a Consolidated Industries Furnace model number HW SV9500. I cannot find the filter on the thing. I was talking to a friend and he says it may be aftermarket. I feel stupid for asking this but would feel more stupid for ignoring it.

Tempstar SP80 w/SV9500. No pilot. [ 7 Answers ]

Woke up a little frosty this morning. Furnace is blowing, but no heat. I pulled the top cover on the SP80 and witnessed the startup sequence. I see no glow from the smart valve ignoter/flame rod assembly (Q3400) and the pilot never lights. The small motor/fan that gets air flow going is running,...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.