 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Smart valve sv9500 no glow?
Smart valve sv9500 I have 29volts to the valve and 29v out to the ignite but no glow I have replaced the ignite and still no glow is it the valve. I have also changed the control board and still no glow I starting to think it's the valve can anybody help..
|
||||
Check out some similar questions!
I have a Heil Natural Gas Furnace with smart valve sv9541 that goes off and the valve click as the ignitor glows on and off while lighting the pilot light which then goes out, and back lit?Is this a flame sensor problem? Thanks for advice.
A haier 80k furnace with sv95,runs continually,with nogas valve trials,the controlboard does not show any fault codes.
Ducane furnace with ST9160B control card : I have a Smart Valve (SV9520H) that seems to pass all tests and shows nothing is wrong (according to indicator flashes) Hot surface Ignitor glows, valve solanoid clicks to allow gas to come out but nothing comes. I disconnected Gas and tried to blow...
We have a home (PA) that only had electric heat when we purchased 7 years ago. Added central air-conditioning. A year later added central propane heating. The heating system "died" a couple of weeks ago. The service company replaced the control board and said it worked. It did not, and they...
Hello, I have two questions. I have a Tempstar gas furnace that has a intermittent smart valve issue. It sometimes goes days and works fine and others, it will not open the main gas line. I get an orange glow from the ignitor, but the gas never comes on and the cycle ends after a few tries....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
