 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
If you have a Whirlpool gold washer(and some others for that matter)that won't go into spin cycle,there is a very good chance the problem is with the lid switch.On my Whirpool gold washer the lid switch separated slightly and I was able to to use two zip ties to hold it together.This fix may or may...
My Whirlpool Gold (Catalyst) Washer model GSX9885JQO will suddenly not drain. I was in the middle of washing several loads of wash. I went to empty the clothes and put the next load in and it had not drained. I ran various parts of the drain cycle over. It will add new water, but wherever it is...
This was our FIRST Whirlpool washer/dryer set and our LAST!! How does one remove the control panel?
I have a Whirlpool washer GSX9885JQ0 that burnt the motor and cap too. Is this a common problem. Is there a way to check the control board to see if that was the problem or is it one of those things that I need to replace the motor and if that burns up then next time I should replace the board...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
