Ask Experts Questions for FREE Help !
Ask
    ntorres1's Avatar
    ntorres1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2011, 05:59 PM
    Replaced board and no status light
    I have a goodman b18099-06 board fried when the draft reducer motor went out so I got new board wired it all up and doesn't even work no status light at all
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Nov 23, 2011, 06:55 PM
    Make sure you have voltage going to the control board. Check and recheck wiring going to the control board with the wire schematic on the blower door. Make sure the blower door safety switch is closing and letting power pass through.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Recently replaced furnace control board, now blower will not come on with AC. [ 3 Answers ]

I recently replaced a 50A50-110 control board (Comfortmaker) with a White-Rodgers universal 50M56U-843 control board and the furnace worked fine throughout the winter. However, I just tried the AC for the first time this season and the blower will not come on with the AC. The compressor and outside...

No status light on furnace control board [ 3 Answers ]

I have a goodman Board number 1012-930 or B18099-05 The status light is off and the machine will not do anything. I have 24 AC going to the board when the door switch is made. Is there a print of the board or does the status light off mean its dead?

Status light out on a 31m73 Air control board [ 0 Answers ]

I had a blown F7 fuze on my 31m73 (B24-P series), replaced the fuze, still got nothing, and the status light has no blinky-flashy. Judging by the diagram, I think it is the blower relay, but I am not sure how to confirm my problem. Does any know the best route to take with a dark status light,...

I replaced the main board on a ge arctica fridge, but it still doesn't cool. [ 0 Answers ]

I have a ge arctica refrigerator, one day I came home and there was water on the floor. My freezer temp was at 22 degrees. I unplugged the fridge and plugged it back in and it reset the fridge to normal temps. I called a service man he said my main board was bad. I put a new main board and now it...

View more questions Search