[hendersonl512]

I have a ge arctica refrigerator, one day I came home and there was water on the floor. My freezer temp was at 22 degrees. I unplugged the fridge and plugged it back in and it reset the fridge to normal temps. I called a service man he said my main board was bad. I put a new main board and now it doesn't cool at all. When I plug in the fridge the digital temp reads -41 degrees on the freezer side and 37 on the fridge side. I hit the turbo cool and the compressor kicks on, but only for about 15 minutes. I called the service man back, he said it was probably the temp control board. But wasn't a 100 percent sure. Before I go spend money on a temp control board, does anyone have an answer?