Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Washing machine discharge hose
[ 2 Answers ]
OK.. is it possible for the discharge hose to pop out on its own? It was pushed in quite far and has a "kink" at the end of the hose to make me believe it even went down far enough to bend around a corner... I ask only because it was completely out and no one says they pulled it out.
Washing machine hose length
[ 1 Answers ]
Do you carry hot & cold hoses in the length of 12inches.
In wall washing machine connections
[ 12 Answers ]
I am planning on moving my laundry from the basement to the first floor, and am curious as to what the current products/methods are for connecting the washing machine. Years ago I used a plastic box that contained a single lever shut off valve, and also a place to hang the drain hose. As I...
Washing machine drain hose
[ 1 Answers ]
I am getting a new washer and want to put it in a different place that the old one. The problem is it's about 8 feet from the standpipe. Can I put on a longer piece of drain hose and use it? Thanks, Rick
Washing machine drain hose
[ 3 Answers ]
I have a Kenmore washer and have a problem of water backing up in the drain pipe. It seems that it drains too quickly and thus the overflow. I the drain pipe comes out of the laundry room floor and there is also a drain on the floor. Could I add on to the drain hose to possibly slow the flow down?... View more questions Search
|