Washing machine hose length

derouen43 Posts: 2, Reputation: 1

New Member

Feb 8, 2010, 07:40 PM

Washing machine hose length

Do you carry hot & cold hoses in the length of 12inches.

derouen43 Posts: 2, Reputation: 1

New Member

Feb 8, 2010, 07:41 PM

Do you have hoses for the washer in the hot & cold 12inches?

Add your answer here.

Check out some similar questions!

Water Leaks from Washing Machine Drain Hose [ 4 Answers ]

We just purchased an new GE washing machine. When water is being discharged during the wash or spin cycle, water leaks from the connection where the drain hose is inserted into the standpipe. Would it be okay to wrap duct tape around this connection. I asked a guy at Home Depot and he advised...

Washing machine hose leaks around input [ 2 Answers ]

My washing machine leaks where the cold water hose joins the blue plastic input thingy. It seems like it is stripped. If I tighten it just "so" it will only drip slightly. If I over tighten it, it actually gets looser and will spray all over. Is there an easy way to fix this or do I have to...

Washing machine drain hose [ 1 Answers ]

I am getting a new washer and want to put it in a different place that the old one. The problem is it's about 8 feet from the standpipe. Can I put on a longer piece of drain hose and use it? Thanks, Rick

Washing machine drain hose [ 3 Answers ]

I have a Kenmore washer and have a problem of water backing up in the drain pipe. It seems that it drains too quickly and thus the overflow. I the drain pipe comes out of the laundry room floor and there is also a drain on the floor. Could I add on to the drain hose to possibly slow the flow down?...

Washing Machine Discharge Hose Length [ 1 Answers ]

I would like to move my washing machine from its current position, directly in front of our utility tubs. The new location will require a discharge hose close to 15' long. (The washer inlet hoses will be about as long, too.) Is there any problem with this? Where can I get this length of...