Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Instlld program thermostat, wrked fine heat all winter, now no heat, a/c or fan?
[ 4 Answers ]
We got a Lux Programmable TX9000a. It installed it in November and heat worked fine all winter. Today I tried to turn on A/C and it didn't work (it is 90 where we live). I tried looking at wiring and perhaps a mis-wired. I am not sure. I have 5 wires and I have two units outside (heat pump and...
My thermostat works fine in a/c but for the heater I have to put the fan on manual
[ 2 Answers ]
I have a hunter thermostat model 44860, and a central air heating a/c unit. The air conditioning system works fine. The heating side however does not kick on the fan in auto, I have to switch it to manual on then of course it doesn't shut off if I don't turn it off because it in on mode not auto?...
HVAC Split Unit Heat works fine, A/C compressor on fan off
[ 10 Answers ]
Hello all. I certainly have found a TON of info on this site, and problems that sound just like mine, but solutions seem to point to different things than in my system. So I apologize in advance if this is a duplicate somebody already answered. I have an older Ducane Oil Furnace converted to...
Fan on ON and ac not working, heat works fine
[ 1 Answers ]
We just bought a new home and I know the AC worked last summer for the people who lived here. I have a LUX 1500 t-stat, a miller ac unit, and a beckett by honeywll furnace motor. Everything was serviced last year. When we put the switch to heat the furnace comes on and runs non stop. When I... View more questions Search
|