Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant +80: fan is fine, no heat. LED 1-3. Filters clean. What should I try next?
[ 3 Answers ]
Have a Bryant 80 plus furnace. Fan works fine. But it's blowing cool air. I've changed the thermostat setting to have the furnace try and make the temp significantly higher than the current temp. The LED flashes 1 short, 3 long. Cleaned the filter. Air flow seems to be fine. Any clues?...
HVAC Split Unit Heat works fine, A/C compressor on fan off
[ 10 Answers ]
Hello all. I certainly have found a TON of info on this site, and problems that sound just like mine, but solutions seem to point to different things than in my system. So I apologize in advance if this is a duplicate somebody already answered. I have an older Ducane Oil Furnace converted to...
Fan setting on a heat thermostat
[ 5 Answers ]
Can you explain to me what this setting is for? We do not have central air but the "fan" option is on the thermostat. I put the setting on "cool", then "fan" and set the thermostat temp for 60 degrees. Cool air came out for about a half hour and cut off automatically and did not come back on. I...
Fan on ON and ac not working, heat works fine
[ 1 Answers ]
We just bought a new home and I know the AC worked last summer for the people who lived here. I have a LUX 1500 t-stat, a miller ac unit, and a beckett by honeywll furnace motor. Everything was serviced last year. When we put the switch to heat the furnace comes on and runs non stop. When I...
Thermostat on Heat and Auto fan but fan is not on
[ 2 Answers ]
Hi, This just started happening. I have a dual zone thermostat. The thermostat downstairs seems to turn on. I set the desired temp at 72 but it does not get any warmer then 67. The thermostat upstairs... I set it on auto but the fan does not run. If I set it on Fan, cold air blows out. ... View more questions Search
|