Ask Experts Questions for FREE Help !
Ask
    radstones71's Avatar
    radstones71 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 2, 2010, 06:24 PM
    My thermostat works fine in a/c but for the heater I have to put the fan on manual
    I have a hunter thermostat model 44860, and a central air heating a/c unit. The air conditioning system works fine. The heating side however does not kick on the fan in auto, I have to switch it to manual on then of course it doesn't shut off if I don't turn it off because it in on mode not auto? Is there a limit switch that's bad or wiring issue?
    radstones71's Avatar
    radstones71 Posts: 2, Reputation: 1
    New Member
     
    #2

    Jan 2, 2010, 07:07 PM

    Found the problem, it was a loose wire. The connection between the rc/rh terminals was loose.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #3

    Jan 2, 2010, 09:24 PM

    Glad you got it fixed, that would have been a hard one for us to help with. Good job.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling Fan Works Fine, Light is Dim [ 18 Answers ]

We have a Hampton Bay "Brookedale" model ceiling fan. It is about a year old and was working fine until a few days ago. We came home and it was on (we left the house and it was turned off), with the fan running and the light on, but not it's usual brightness, very dim. I've checked the wiring to...

HVAC Split Unit Heat works fine, A/C compressor on fan off [ 10 Answers ]

Hello all. I certainly have found a TON of info on this site, and problems that sound just like mine, but solutions seem to point to different things than in my system. So I apologize in advance if this is a duplicate somebody already answered. I have an older Ducane Oil Furnace converted to...

The air conditioner works fine. When put in to the heat mode the out door unit trips [ 2 Answers ]

The air conditioner works fine. When put in to the heat mode the out door unit trips outs on high head pressure but the indoor fan still blows. Why?

Fan on ON and ac not working, heat works fine [ 1 Answers ]

We just bought a new home and I know the AC worked last summer for the people who lived here. I have a LUX 1500 t-stat, a miller ac unit, and a beckett by honeywll furnace motor. Everything was serviced last year. When we put the switch to heat the furnace comes on and runs non stop. When I...

CPU fan works fine, until my monitor is plugged in.. then everything dies. [ 3 Answers ]

My HP Pavilion XT 936 gave me an error messge, that said my CPU fan was not working, and that it was going to shut off in 5 seconds to stop it from overheating... and it did shut right off. I took it to my techno buddy, who sat it on his desk... and of course, it worked fine... I took it home, and...


View more questions Search