Ask Experts Questions for FREE Help !
Ask
    thomasvo's Avatar
    thomasvo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2011, 08:23 AM
    Rheem Criterion Won't Stay Lit
    Okay, I have a Rheem Criterion Model Number RGDG-07NAUER. My problem started when I had a contractor come and install a vent in my bathroom. He ran a air duct into my heating duct which he bent my inducer blower. Some how that cause my control board to be burnt out. I replace it and the flame sensor and now when I turn on my heater all that happens is that it will start up and shut down after 2 seconds. This will happen twice then the fan will kick start and no heat will come out of the heater.

    Please help...
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #2

    Oct 18, 2011, 07:28 PM
    Are you saying that a Contractor installed your bathroom fan vent through a heating duct?? How was he anywhere near the inducer motor, it is on the furnace and behind a panel? Maybe a bit more explanation... Thank you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem furnace troubleshooting pilot light will not stay lit [ 2 Answers ]

1989 rheem furnace pilot light will not stay lit

Furnace won't stay lit.pilot light is on but burners will ignite but don't stay lit [ 1 Answers ]

My Rheem 40 gal LPG water heater has sat for two years. The pilot won't stay lit? [ 1 Answers ]

Installed in 2002, this unit was been drained and sitting the last two years. I have filled and tried to light the standing LPG pilot, but it won't stay lit upon release of the valve know push.

Rheem pilot stay lit but wong ignite gas in the chambers [ 8 Answers ]

Rheem model rgld-1one-jr, ignitor model sp715-us17-15u. The pilot will stay lite but will not lite the gas in the gas chambers. Yesterday I turned everything off all night gas valve and t-stat when I got up ithought I would turn it on and listen for a while. So the pilot lights and the gas was...

I have a rheem furnace, new motor, I'm getting faint heat, burners won't stay lit [ 2 Answers ]

I have a new motor, thermostat is only a year and a half old, heat comes on, burners won't stay lit. Getting faint heat from vents on first floor level of house

View more questions Search