Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Harbor Breeze fan
[ 6 Answers ]
I have a habor breeze flush mount fan that is 10 years old (I use it ALL the time) and it is making a lot of noice recently. Can there be something done to stop the noice? Can it be oiled in some way?
Harbor Breeze Fan
[ 2 Answers ]
I recently purchased two Harbor Breeze Bellhaven fans.. I used 14 gauge wire with 15 amp circuit.. The wire was used in the past for a heater/light in my bathroom, which I replaced including the wiring. So I used the old wiring for the new fans I installed. I purchased two Harbor Breeze switches...
Harbor Breeze Switches
[ 1 Answers ]
I have two Harbor Breeze frequency fan control switches on the same circuit. Both are set on different codes to operate different fans. Problems is that when both switches are turn on I lose control of the fan that is turned on second. They operate individually but not together.
Harbor breeze fan
[ 1 Answers ]
Where does the blue wire get connected to?
Harbor breeze fan
[ 1 Answers ]
We recently installed a harbor breeze fan. It worked fine initially, then did strange things. It stopped spinning one direction and reversed itself. It did this twice. Now the speed of the fan is not working at all - it barely turns. An electrician checked the installation and checked the... View more questions Search
|