Ask Experts Questions for FREE Help !
Ask
    tuleman's Avatar
    tuleman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 17, 2007, 04:40 PM
    Harbor Breeze Switches
    I have two Harbor Breeze frequency fan control switches on the same circuit. Both are set on different codes to operate different fans. Problems is that when both switches are turn on I lose control of the fan that is turned on second. They operate individually but not together.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Sep 17, 2007, 04:50 PM
    I don't understand. You said that they are on separate frequencies, yet the control for one fan will cancel the other? Are these hard-wired RF controls or wireless?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor breeze fan [ 4 Answers ]

I have a harbor breeze ceiling with a remote that was never wired in.can I reverse the fan direction manually.

Harbor Breeze Fan [ 3 Answers ]

We have a Harbor Breeze fan in our bedroom, its almost directly over our bed. The fan itself works fine (remote etc) but at low and mediom speed it has an anoying "click" which drives us nuts. I took the blades off checked for any screws touching the armiture, ran it with out the blades and I can...

Harbor breeze fan [ 1 Answers ]

We recently installed a harbor breeze fan. It worked fine initially, then did strange things. It stopped spinning one direction and reversed itself. It did this twice. Now the speed of the fan is not working at all - it barely turns. An electrician checked the installation and checked the...

Harbor breeze fans [ 3 Answers ]

I have a harbor breeze fan w/a downlight. Separately installed remote. Worked fine until I used the reverse switch. Now the fan won't start and the light won't go on. Any suggestions MartinG

Harbor Breeze fan [ 3 Answers ]

Just installed my fan and everything works perfectly. After 10 minutes, the HI speed does not work anymore when pushed on the remote (the fan is just stopped) and it looks like MED and LOW speeds are the same. Can anybody help me with this? Thanks

View more questions Search