Ask Experts Questions for FREE Help !
Ask
    fountain4154's Avatar
    fountain4154 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 9, 2011, 10:22 AM
    Bryant furnace?
    I have this model(Bryan CB5AXA030000AAA) and the heat will come on for just a few minutes and turn off. I have replace the thermostat and still it will not heater will not stay on. The Blower seems to work. Help!
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Oct 9, 2011, 07:10 PM
    The model # you are giving looks like the # to the evaporator coil. The model # for your furnace is inside the furnace left side. While you have the door off look through the small glass window on the blower door an count the blinks of the light on the control board. Light code is on the door of the furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why? [ 0 Answers ]

Blower motor on all the time. No heat from furnace. Why?

Bryant furnace? [ 1 Answers ]

I have a bryant furnace about 7yrs old for the last 5yrs I have had to have service on it the company says it needed cleaning it calls for heat it cycles the glow bar heats up flames ignite then 3 saconds later goes out I turn the power switch to off for twenty seconds then it will work for awhile...

My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi [ 0 Answers ]

Switch furnace to emergency mode on my Bryant 90 furnace [ 2 Answers ]

I have run out of propane and we are in the middel of a blizzard. How can I switch my furnace to emergency mode? Thanks, Brett

Bryant furnace [ 2 Answers ]

I have nine years old 80 BTU furnace.when I turn it on it start and shut down.if I open furnace door and start it works well.what is the problem?

View more questions Search