Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Amana high eff. 80 won't ignite. Pushed dinog switsh reads: lockout check furnace. Have
[ 1 Answers ]
Furnace does not "light" have shut gas and power off several times following the instructions on panel. Nothing happens. I can turn the fan on it works. I pushed in on the panel switch and the led light fkashed only once. Reads: lockout check furnace. I noticed I could hear a low hum when I held...
My furnace will not ignite.
[ 0 Answers ]
I have removed the panels and cleaned the injectors, which were not dirty. It seems as if it is not getting spark. I can feel slight gas blowing, as well as smell the gas and feel slight heat around the igniters. By reading my chart, I am getting a code six. This indicates that it is 'Failure...
Amana gas dryer PLG8409W2 won't ignite
[ 0 Answers ]
I have an Amana gas dryer model #PLG8409W2 that won't dry. When I opened the front to look at the heating mechanism, I noted that the igniter will turn on and produce a nice red-orange glow, but it never ignites. It would appear that the gas flow doesn't turn on. Everything else on the dryer...
Amana 80 sse will not ignite
[ 1 Answers ]
I have an amana 80 sse and it does not ignite the gas after the click for starting the gas. There is a second click later and I assume that is the gas being turned off since it didn't ignite. Is there anything that I can check before calling the heating guy?
My heater won't ignite
[ 2 Answers ]
My heater won't ignite sometimes, what should I do? View more questions Search
|