 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My furnace will not ignite.
I have removed the panels and cleaned the injectors, which were not dirty. It seems as if it is not getting spark. I can feel slight gas blowing, as well as smell the gas and feel slight heat around the igniters. By reading my chart, I am getting a code six. This indicates that it is 'Failure to ignite' from reading the chart. We have tested th wires and no luc. My furnace is an Internatinal Comfort heating and air unit, 4 years old. The blower is working and I have checked the breakers. Any suggestions?
|
||||
Check out some similar questions!
I'm trying to find out why my furnace won't ignite. The pilot light is on, I can hear something turn off when I checked the breaker and it came back on when I turned the breaker back on. If I turn the fan to on it works. I'm thinking it's the thermo coupler but I don't know how to test that. ...
I have a goodman furnace modle# gupi100-4 the problem that I am having is when you turn the furnace on the induce draft motor come on the ignition comes on for a couple seconds and goes off and it keeps going on and off and never lights the furnace.I have replaced the draft motor,pressure switch...
My furnace will not ignite, it's a coleman evcon mobile home heating/cooling unit. Is there something that I can do myself to get it to ignite? Or what part might need replaced?
Hey guys, I've been looking through these forums but haven't found an exact answer to my question, so figured I'd start my own thread. I have an American Standard gas furnace that uses a glow plug-style ignition system to light the gas, but the furnace only blows cold air. Let's see if I can get...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
