Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Panasonic PT-50LC13 TV turns off after a min or two
[ 0 Answers ]
I have a Panasonic PT-50LC13 TV and I turn it on and the picture comes up and everything but after a min or two the TV shuts off and the power button blinks red and the lamp light blinks. The bulb was replaced about a year and a half ago and I have tried unplugging the TV and plugging it back in...
Pt 50lc13 panasonic
[ 2 Answers ]
When Tv is first turned on there is vertical pink/white/purple lines; no picture; but the sound works. This is the same for all inputs. After a few minutes the picture will come on and the TV works. I called panasonic, they told me to reset TV by pushing the vol - on TV console while at same time...
Panasonic pt-50lc13 TV power supply?
[ 1 Answers ]
The TV was working fine, then it stopped.. power on light and lamp light flash on and off, unplug and restart... tv works for a minute then stops again... any ideas... thanks
Panasonic TV
[ 1 Answers ]
My 2002 Panasonic 32" Tv will power on but no picture appears. After warmin up and tapping the sides of the TV the picture will appear but occasionally will go off. Any ideas of the cause and if it's worth fixing.
Panasonic tv: PT-50LC13 is not 5 inches of screen on each side in video mode
[ 1 Answers ]
I have a Panasonic TV model number PT-50LC13, and last night when I turned it to video mode to watch a movie the TV switched to a "full screen mode" to where it doesn't use about 5 inches of the screen on each side of the picture. The TV still shows the whole picture but it is in a condenced view... View more questions Search
|