Ask Experts Questions for FREE Help !
Ask
    rockytop57's Avatar
    rockytop57 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 18, 2009, 02:11 PM
    Panasonic pt-50lc13 TV power supply?
    The TV was working fine, then it stopped.. power on light and lamp light flash on and off, unplug and restart... tv works for a minute then stops again... any ideas... thanks
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
    		  
    #2

    May 19, 2009, 05:09 AM

    Difficult to troubleshoot without looking at it. It seems that something is overheating and shutting down.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Panasonic TV has no power [ 1 Answers ]

My panasonic TV has no power. Will not turn on at all. Any ideas what the problem might be? I'm thinking it's the fuse.

Panasonic tv: PT-50LC13 is not 5 inches of screen on each side in video mode [ 1 Answers ]

I have a Panasonic TV model number PT-50LC13, and last night when I turned it to video mode to watch a movie the TV switched to a "full screen mode" to where it doesn't use about 5 inches of the screen on each side of the picture. The TV still shows the whole picture but it is in a condenced view...

Panasonic TV issue, power on and off [ 2 Answers ]

Ive got a few year old panasonic TV which I just bought used, and it randomly turns itself on and off. It acts like that's no power, but I couldn't see anything visually wrong with the back open. Anybody have any ideas?

Panasonic TV PT-47WX54J Pop after Power up? [ 1 Answers ]

Just purchased this TV not working. When I power it up 5 seconds later you hear a pop from the speakers and the power light turns red and flashes every 6 seconds. I know this sounds like component failure, anyone familiar with the description of this? Any suggestions. Thanks, PaulieB

View more questions Search