I have a new Hunter 44155C thermostat and am replacing an old carrier thermostat

boyosad13 Posts: 1, Reputation: 1

New Member

Jul 30, 2011, 12:01 PM

I have a new Hunter 44155C thermostat and am replacing an old carrier thermostat

The old Carrier has a wiring code as follows:
C= Brown
W2 = White
R = Red
E= Blue
G= green
O = Orange
Y = Yellow

According to the Hunter instructions I am uncertain about the O and the E ? Can you help?

Check out some similar questions!

I'm replacing a white rodgers 1F58-72 model thermostat with a Hunter model 44155C [ 2 Answers ]

There are some different wiring codes that are different how do I do it.

I'm replacing an old 2 wire thermostat with a Hunter (#44155C [ 1 Answers ]

I'm replacing an old thermostats with a new Hunter Thermostat (44155c), when I removed the old thermostat there are two wires a red one and a black one. The new thermostat has G,Rc,Rh,Y/O,W/B,Y1 with a jumper on Rc and Rh. Where should I connect the two wires coming from the wall?

I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement? [ 3 Answers ]

I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...

Hunter thermostat 44155c [ 1 Answers ]

I have the following colored wires coming out of the wall Green Red Orange Yellow White Black Blue The thermostat has the following connections:

Hunter 44155C Thermostat [ 1 Answers ]

New hunter 44155C thermostat these are my ports to connect to: Rh- 24 volt Rc- 24 volt cool g- Fan y/o- air conditioning compressor w/b- heating or reverse valve operation in heat mode. y1- heat pump compressor These are my wires

View more questions Search

Check out some similar questions!

Add your answer here.