Ask Experts Questions for FREE Help !
Ask
    jpwworker's Avatar
    jpwworker Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 25, 2010, 08:25 AM
    I'm replacing an old 2 wire thermostat with a Hunter (#44155C
    I'm replacing an old thermostats with a new Hunter Thermostat (44155c), when I removed the old thermostat there are two wires a red one and a black one. The new thermostat has G,Rc,Rh,Y/O,W/B,Y1 with a jumper on Rc and Rh. Where should I connect the two wires coming from the wall?
    alanhan's Avatar
    alanhan Posts: 6, Reputation: 1
    New Member
    		  
    #2

    Feb 25, 2010, 11:22 AM
    Black-Rh, white-W. for now, only for heating is OK. You should replace the signal wire, if you replace a new furnace or want to control fan.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I'm replacing a white rodgers 1F58-72 model thermostat with a Hunter model 44155C [ 2 Answers ]

There are some different wiring codes that are different how do I do it.

I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement? [ 3 Answers ]

I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...

Hunter thermostat 44155c [ 1 Answers ]

I have the following colored wires coming out of the wall Green Red Orange Yellow White Black Blue The thermostat has the following connections:

Wiring issues changing from a 5 wire hunter thermostat to a 44155c [ 1 Answers ]

I joined a co-worker (who is currently doing something) to this site - so after this post there will be no more "him"ses vs "I" 's for the pronouns. :) (and I'm sure he loves the "username" I chose for him) The problem he is having is that he has 5 wires from the wall that used to be hooked to...

How do I wire a thermostat, replacing Maple Chase with Hunter? [ 4 Answers ]

I have a Maple Chase 09520 thermostat that I am replacing with a Hunter Just Right thermostat. There are 7 wires for the Maple Chase and only 5 for the Hunter. Which do I use? And what do I do with the extras? This is how it is wired in the Maple Chase: Blue-->C Red-->R Yellow-->Y White-->E...

View more questions Search