Ask Experts Questions for FREE Help !
Ask
    jujman's Avatar
    jujman Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 31, 2007, 04:46 PM
    Hunter 44155C Thermostat
    New hunter 44155C thermostat these are my ports to connect to:

    Rh- 24 volt
    Rc- 24 volt cool
    g- Fan
    y/o- air conditioning compressor
    w/b- heating or reverse valve operation in heat mode.
    y1- heat pump compressor

    These are my wires

    Red
    Brown
    Yellow
    Blue
    Green
    Orange
    White

    Can someone help me figure this out
    My unit is central electric heat and air
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
     
    #2

    Oct 31, 2007, 06:52 PM
    This is typical wiring for thermostat

    http://www.aubetech.com/manuel/2/TH147-P.pdf

    2.3 Shows wire locations

    2.3.5 Shows wiring for 1 transformer -- note RC to RH jumper

    2.3.6 Shows wiring for 2 transformers -- jumper removed

    W = Heat Y = Cool G = Fan R = 24 volt

    That's as much as I can give you without being there

    Check wires to see if they are wired correctly...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Help to replace thermostat Honeywell T841a for Hunter 44155c [ 1 Answers ]

Hi, I am trying to replace my T841a 1712 Non-Programmable Heat Pump Universal Thermostat for a Hunter Model 44155C, but I can't make the new unit work.:confused: The Honeywell thermostat has the following connections: Color Cable Terminal Blue -----> X Red -----> W2 ...

Thermostat Wiring, Hunter 44155c [ 2 Answers ]

Hello, Having issues wiring my new thermostat. I've got the heat/ac to switch on but I had to mess with it some. I have a G, R, B, Y & W wire coming to my thermostat. My thermostat has a G, RC, RH, Y/O, W/B & Y1 port. This is what I messed with: AC worked: G to G, R to RC, B to RH, Y to...

Wiring issues with Hunter 44155c. [ 5 Answers ]

I am having wiring issues with Hunter 44155c. I thought I had it but my heater does not seem to be functioning. It may be the circuit breaker. My old wires are red, green, white, blue, and yellow. How do I place them on the hunter 44155c.

Hunter 44155c wiring issues [ 1 Answers ]

I'm trying to replace an old rheem thermostat with a hunter Model 44155C. The wiring colors are confusing to a novice like me. There are five wires: red, green, blue, yellow and white. The hunter thermostat has connections for RH, RC, G, Y/O, W/B, and Y1. The only two wires that I am relatively...

Need Help with Hunter Thermostat Please [ 4 Answers ]

I have a Payne PF1MNC hvac, and just replaced my White Rodgers thermostat (It wasn't blowing hot air or kicking in in Auto mode) with a Hunter 44155C. There were 4 wires attached: G to G R to Rh (with jumper) Y to Y1 W to W And an unattached B I attached them the same to the Hunter:


View more questions Search