Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace a remote ceiling fan control with wall switch
[ 1 Answers ]
I have a hunter fan with remote control. The receiver has failed, can I remove the receiver and run the motor with 3 speed wall control. If so how do I wire the motor to ceiling wires without the receiver?
Replacing speed control switch on ceiling fans
[ 1 Answers ]
Hello, I have just replaced a speed control switch on my ceiling fan and now it doesn't work at all.The kight works but the fan makes a humming sound when I try to turn on the fan.I did switch the (4)wires one at a time so I didn't mix the wires up. Please Help!
Can I use one 3-speed wall switch for my two Harbor Breeze ceiling fans?
[ 1 Answers ]
I bought 2 new Harbor Breeze Calera ceiling fans for my newly remodeled great room and want to control them in parallel from the single pre-wired wall switch location. These are simple pull chain 3-speed reversible fans, no lights. They offer remote control and wall control options in the specs....
Two ceiling fans- 1 wall switch
[ 3 Answers ]
I have 1 wall switch connected to two porch lights. Can I remove the lights, install fans, and have them work off 1 universal wall control?
Connecting dual wall switch ceiling fans
[ 3 Answers ]
Fan wiring instructions are not all-inclusive. I am replacing a light fixture with a fan/light combo in a room with separate fan and light wall switches. House wiring to fixture is four wire, ground, white, black and red. Red and white were in service for light fixture, with black being idle. ... View more questions Search
|