 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I got the control lock button to go off, now my dishwasher won't start. Any suggestio
I have a kenmore Ultrawash dishwasher. The control lock button was on, and I unlocked that by holding in the noheat dry button. Now the dishwasher still won't start. What buttons do I need to push?
|
||||
Check out some similar questions!
Kenmore Ultra Wash dishwasher won't start. The control lock red light (above the "start" pad) flashes when I press "start" or any of the control lights. The door is closed completely.
Hello, I own a Kenmore Ultra Wash Dishwasher model 665. The Lock On light continues to flash red. I reviewed the manual following the instructions of the NO HEAT DRY 'lock button' to hold for 4 seconds to Unlock but this has not worked. The Lock On Light continues to flash red and I'm unable to...
I have a Kenmore Ultra Wash dishwasher that will not start when pushing the start pad location. It will pump when put on the Cancel/Drain button, but will not start after that. It does have power, or the pump would not run during the Cancel/Drain cycle. The washer was purchased in Jan 20, 2006...
We have a Kenmore dishwasher with the "AIR LOCK" control switch on and cannot get it off. The dishwasher itself says to hold this button down for 4 seconds, but that only goes to another light, then when removed, goes back the AIR LOCK light. The dishwasher is completely locked down. It worked last...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
