[Flashman2]

I need to cut several arcs of about 6 metre radius or more. They can be in around 2 metre segments. I've tried using a template but I can't get the accuracy required.
Any ideas ?
Flashy

[sledgehammer]

what kind of material are you cutting?
plywood, 2x8?

[Nwptsailor]

Do you have an extension table fashioned , so that a jig which holds the material to be cut can repeatedly swing through the same arc ?

[Flashman2]

Yes.

[jujubrose]

Is it a true radius if so use a router instead of a band saw if cutting through thick wood i.e. 4x6 cut half way through then rough cut on bandsaw and finish with a router with a bearing on the bottom smooth and clean and true as the first cut. You can make a router jig very easy let me know and I will help if needed.

Have Fun Julie Jujubrose@yahoo .com

[Flashman2]

Thanks Julie. I'll give a try.. and yes, I'll at least try to have fun!!