 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2005 TRANE HVAC Heat Pump outside FAN won't run
When I left for work on 5/24/11 my a/c was working fine. I have a TRANE HVAC heating PUMP. I got home from work and the Thermostat was set for 76 and it was 81 on the inside. The inside unit is running but no cold air is blowing. We (my husband and I) go outside & the unit fan is not running. My husband bumps the temp so it will cut off to check the breaker and fuses. He flips the HVAC switch and tries the air again & we still get the same thing. HOT air & the fan on the outside unit still will not come on. It clicks a couple of times like it wants to come on but it does not come on. PLEASE help, LIKE LIVING IN HELL.
|
||||
Check out some similar questions!
When on heat and temp set is reached the fan continues to run cold air. Fan will shut off if temp set is lowered 2 degrees. Heat pump is Trane, thermostat is digital white rogers . A similar system, less BTU, shuts off when temp reached.
I would be most appreciative if I could get some help with my Trane Weathertron XE 1200 outside compressor and outside fan unit that is not running at all. I have heat which I think is only due to the Emer (auxillary) heat strips coming on and the inside air handler fan is blowing heat into the...
This board is awesome. I have done some reading first on here. Here's my case: Compr runs fine. Fan on HVAC blower inside runs only in Heat mode. Not on Cool. Not even on "FAN-ON" as opposed to FAN-AUTO. Can this be an issue with relay and board within HVAC? Per other thread, it was talking...
We have two trane Heat pump units A larger and smaller unit The fan on the larger unit I can see running outside The fan on the smaller unit I have not seen runnning. We have tried turning it off and on and the heat up and down Should it come on and run. I believe the air out of this unit is...
I have a heat pump system and a programmable thermostat. The system runs fine, in heat or cool mode, with the fan set to 'auto'. It will not run (no fan) in heat or cool mode with the fan setting set to 'on'.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
