 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water pump pumps water under pressure into pressure tank. When pressure reaches a certain point, say 50#, then the switch turns the pump off. Water is stored under pressure in the tank, waiting to be used. As water is used, the pressure drops to a set point, at which time the pump turns back on. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hey guys. Where would I install an expansion tank? I have radiators and don't have an expansion tank.
Recently my submerged well pump has been running every 4 minutes and then shutting down, I also noticed that water pressure is lower than usual and that the pump runs to keep the pressure at 28-30 psi. Is there a problem with the expansion tank?
Dear Sir, In our project there is specified a closed expansion tank for the chilled water system, but our contractor wanted to change to the bladder type expansion tank. Please advise, if it is suitable to serve the purpose. Also he says that the specified tank is a plain steel tank, which are...
Why do I use expansion tank in a chilled water system?
If I install a water pressure reducing valve on my main line for my hot water heater,do I need to install an expansion tank for my hot water heater?
View more questions Search
|
