Ask Experts Questions for FREE Help !
Ask
    Jsarver's Avatar
    Jsarver Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2011, 06:16 PM
    Wiring for a AO smith blower motor?
    Need help wiring new blower motor for ac. New one has 4 wires, old one has 5.

Check out some similar questions!

AO Smith condenser motor wiring [ 8 Answers ]

I am replacing a GE arconditionaing condenser fan motor with an AO Smith 5-5/8" diameter totally enclosed outdoor sleeve bearing fan motor Stock Number FSE1026S. The specs on the fans are simillar and the AO Smith motor is a universal replacement for my unit; however the old GE fan motor had four...

Need help wiring an AO smith 2 1/2hp two speed pump motor. [ 0 Answers ]

4 wires coming down from two speed switch, 1-green, 2-black, 1 red. The motor has a plate with 3 termination spaces marked 1, 2, 3 or 4. The green goes to the green grounding screw. Which terminals do the 2 black and 1 red occupy to get the two speeds. 230 volt motor, Centuary by AO smith.

GE to AO Smith Fan blower motor wiring [ 2 Answers ]

I am replacing a GE indoor fan blower motor with an AO Smith motor (same specs, supposedly the replacement motor). The old GE motor had only two wires besides the ground wire (1 black, 1 yellow, & green ground wire) Both the yellow and black wires from the GE motor were attached to the capacitor;...

Oiling an AO Smith furnace blower motor [ 1 Answers ]

Hi, I have a gas furnace with an AO Smith Conservationist motor in the blower. It works but it seems to be working too hard, and I think it needs oil. However, I don't see any oil ports. Does anyone know where I would find these? Or do I just squirt a few drops of motor oil on the end of the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.