 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Need help wiring an AO smith 2 1/2hp two speed pump motor.
4 wires coming down from two speed switch, 1-green, 2-black, 1 red. The motor has a plate with 3 termination spaces marked 1, 2, 3 or 4. The green goes to the green grounding screw. Which terminals do the 2 black and 1 red occupy to get the two speeds. 230 volt motor, Centuary by AO smith.
|
||||
Check out some similar questions!
I am replacing a GE arconditionaing condenser fan motor with an AO Smith 5-5/8" diameter totally enclosed outdoor sleeve bearing fan motor Stock Number FSE1026S. The specs on the fans are simillar and the AO Smith motor is a universal replacement for my unit; however the old GE fan motor had four...
It is a BN81 1725/3250 with L1, L2, A, B white and brown wire connections. I get it to run on white on L2, Black on B, but I cannot get low speed to run. What is correct connection for my white, red, and black wires to go to my controller? Thanks
Instructions state prepare a three core electrical set with plug. Okay Loosen the two copper screws marked with "V1 W1 & U1 and fasten the electric Power leads to them. But which one is hot(Black) and which one is Neutral(white) or does it matter. I know where the terminal for the green...
I am replacing a GE indoor fan blower motor with an AO Smith motor (same specs, supposedly the replacement motor). The old GE motor had only two wires besides the ground wire (1 black, 1 yellow, & green ground wire) Both the yellow and black wires from the GE motor were attached to the capacitor;...
I have a GE 2HP 120V electric treadmill motor and it didn't come with any wiring diagram. I want to use it on a variable speed belt drive unit. The motor is a type BD6219 and it has seven wires, one of which is a ground attached to the chassis frame. The other six are all various colors and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
