Ask Experts Questions for FREE Help !
Ask
    pompb's Avatar
    pompb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 31, 2011, 01:23 PM
    Ford f250 troubleshooting?
    06 f250 6L 188K never had wrench on engine 5k oil changes at ford dealer replaced fuel pump 158k truck starte smoking black from low rpm a little hesitation now billows white smoke at low rpm slowly accelerates to 2500rpm then runs a little black exhaust then accelerates fine. A little rough starting always allow engine to warmup and idle for 3 minutes before shutting down any ideas on problem?
    e
    L
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 31, 2011, 02:02 PM

    See if this link helps:

    https://www.askmehelpdesk.com/cars-t...ml#post1977241
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ford f250 6.0 not get fuel [ 0 Answers ]

I have A ford f250 with a 6.0 I changed both fuel filters and now the truck only made it a half mile down the Rd. When I pull out the top filter it's dry and the one on the frame is always filled with fuel... What am I missing?

Ford 2003 f250 [ 0 Answers ]

My 2003 f250 will not start when the overdrive "off" light is on. When I turn the key on and off many times it will go off and the engine will start and run fine. Why is this and what can I do about it? Thanks for any help

Ford F250 Diesel [ 8 Answers ]

How do I change the head in my Ford F250 diesel?

Ford f250 problems [ 2 Answers ]

Why would the rear diferential grind and jump when turning under heavy four wheel drive load, but run smooth under all other conditions? 1995 f250 power stroke.

Ford f250 6.0 [ 2 Answers ]

2004 f250 6.0 power stroke it will turn over but not start

View more questions Search