Ask Experts Questions for FREE Help !
Ask
    hippysherree's Avatar
    hippysherree Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Mar 29, 2011, 05:44 AM
    What size jubilee clip do I need to put round my washer pipe
    I'm a silly women on my own as I'm a widow I got a new washer today and they say I need a jubilee clip to put round the waste pipe there are all these different sizes on the tool website can anybody tell me please which one I can't use it till I get one thanks so much
    Dr1757's Avatar
    Dr1757 Posts: 186, Reputation: 25
    Junior Member
    		  
    #2

    Mar 29, 2011, 06:39 AM

    A jubilee clip in reality is a stainless steel clamp. If your washer hose is going into a flexible hose you would need to clamp them together. If your washer hose is "U" shaped at the discharge end and is going into a ridge pipe, you probably don't need to clamp them together.
    hippysherree's Avatar
    hippysherree Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Mar 29, 2011, 07:07 AM
    Sorry I don't understand I do need a jubilee clip as the drain pipe needs to fit into the pipe under the sink as its too loose and water is leaking I need to know the size of the jubilee as there are several I've measured round the pipe and its 3 1/2 inches so do I get an 80mm to 90mm one thanks
    Dr1757's Avatar
    Dr1757 Posts: 186, Reputation: 25
    Junior Member
    		  
    #4

    Mar 29, 2011, 09:36 AM

    3 1/2inches = 88.90 mm
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #5

    Mar 29, 2011, 10:21 PM
    You need a 90 mm clip. DrTom4444
    hippysherree's Avatar
    hippysherree Posts: 5, Reputation: 1
    New Member
    		  
    #6

    Mar 30, 2011, 03:36 AM
    Comment on drtom4444's post
    Thank you very much for your help they do them 8omm-100mm so I've ordered one of those also I've ordered a little tool called a jubilee clip driver so I should be able to manage love hippy sherree
    hippysherree's Avatar
    hippysherree Posts: 5, Reputation: 1
    New Member
    		  
    #7

    Mar 30, 2011, 03:37 AM
    Comment on Dr1757's post
    Thanks very much for your help they do tham in sizes 80mm-100mm so as that's in the middle it should fit
    Dr1757's Avatar
    Dr1757 Posts: 186, Reputation: 25
    Junior Member
    		  
    #8

    Mar 31, 2011, 03:07 AM

    I'm glad we were able to help you out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can you put wadding round exposed external gas pipes? [ 3 Answers ]

Does it hurt to raise drian pipe up on washer to level of stand pipe [ 2 Answers ]

In order to camouflage hoses and drain pipe running from washer, I want to run all 3 through a pvc pipe and worried raising the level of drain pipe up on the washer might cause a problem

Put pipe thread on abs to cast iron pipe threads? [ 3 Answers ]

I have a 1-1/2" cast iron show drain. will attach to 1-1/2" abs male threaded coupling. Do I need to put pipe thread or plummers puty on the threads?

Need washer drain pipe installed, now washer stand pipe is backing up. [ 3 Answers ]

I've had to route my washer drain out of my septic system (drain fields are bad). In the house crawl space the washer pipe 2" pvc came through the floor one bend (elbow) and 3' of travel to the septic cast iron pipe down to the septic tank. I cut into the pvc just past the elbow (maybe 2' past)...

Bended 1" copper pipe, how to make it perfectly round? [ 6 Answers ]

Hello, I have a 1" copper pipe that is not perfectly round. I need to solder a fitting on it but the fitting doesn't fit since its not perfectly round. How can I make it perfectly round? Is there such a tool to do this at 1"?? Thank you, Pierre

View more questions Search