 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
installation of Honeywell thermostat T874R?
I am replacing a SECO thermostat with a Honeywell T874R the color wires I have are
Blue White Brown Red Yellow Green the connectiona are W3,W2,X2,L,O,X,R,G,Y,B,E,W1; how would the connections go. Thanks to all that help. |
||||
Check out some similar questions!
I have a Trane XE 1100 and my son tried to put a new digital thermostat in for me, in place of an old Honeywell mercury thermostat (model T874R 1053). When he unhooked the wires he didn't tag them, the digital thermostat didn't work and needless to say, He nor I can figure out how to connect the...
We have Concord heat pump in our new home. There was a LuxPro thermostat connected to the system. I purchased a Honeywell RTH7600D in order to have a programmable thermostat. I replace the old thermostat with the new Honeywell (following the directions of the Honeywell Tstat). When I started it...
I just purchased this thermostat. My old one had 5 wires. White - W green - G yellow - Y red - Rh and Blue C. I put the wires in as labeled and did nothing with the blue. I do not have a furnace, I have an air handler that runs both the air and heat. The handler was the only thing running prior to...
I'm installing a Honeywell thermostat RTH3100C the problem I'm having is the wires. I have red, green, orange, 2tan,blue, and a brown. Ok this is the letter they where on on the old themostat RED=R, GREEN=G, ORANGE=O, Tan1=W2, Blue=C, TAN2=E, BROWN=L. the thermostat has them.heat to. Need help fast...
I didn't happen to look at the wires before disconnecting the old thermostat. I didn't think it was that difficult of task after doing mine. Ummm... then I looked at the wire colors! I've got R, W, G all coming from the furnace transformer. Green was not attached to anything, though. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
