 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What is an efficient way to render hydro electric power from a contained water source
Is there a way to use hydro electric power in a contained water source.. like... making a large tank reservoir, then making a spillway at the top, and several wheels to the bottom.. is this just a loss of power if I used pumps to return the water to its res.
|
||||
|
||||
|
Hydro power works on the principle of converting the gravitational potential energy of the water into electrical energy. In order for electrical energy to be produced, the water must end with less gravitational potential energy than it started. Therefore, it must leave the system at a lower altitude than it started. Pumping the water back to its original starting position does not meet this criterion. It will, as you said, be a net loss of energy (due to the fact that the system is less than 100% efficient). Unless there's a natural (i.e. not powered by pumps) in-flow of new water into the reservoir, you can't magically create energy out of it. Sorry.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Do you have to shut off the power to a electric water heater before you drain it ?
Battery good. Deere 175 hydro won't start. No solenoid click or power to starter. Recently, have had to press repeatedly on brake to engage starter. Shorted out brake solenoid with no effect. Battery is good. Any other suggestions? Should I jump the starter directly from the battery to...
I create unique urinals and like to have them flush while on they are on display. In the past I have used a garden hose connected to a water source, a collection bucket and a sump pump that takes the water out of the display - usually into a garden or drain. I don't always have a water source or a...
Can anyone offer their thoughts on hydronic air heating systems? I currently have a 20+yr old oil fired forced hot air system with a stand alone oil fired hot water tank and would like to replace them with a hydronic air system to produce both heat and hot water at the same time. By removing the...
I had and existing gfci power outlet. I had some remodeling done, and now I want to put a new gfci power outlet in. Does this power come off directly from the breaker panel, or can I use an existing power source?
View more questions Search
|
