Ask Experts Questions for FREE Help !
Ask
    melbell26's Avatar
    melbell26 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2011, 11:42 AM
    Hampton bay replaced burned out receiver fan still not working?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 6, 2011, 11:57 AM

    What did you replace it with? Do all of the dip switches on both the remote and the receiver match perfectly?
    melbell26's Avatar
    melbell26 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Feb 6, 2011, 12:06 PM
    Comment on ballengerb1's post
    Replaced from customer service via Hampton Bay. All switches are in down position. Think I may need to replace battery in remote. Am going to try this and see if that works. Have red light on remote think they is slight power, but battery is old.
    melbell26's Avatar
    melbell26 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Feb 6, 2011, 12:08 PM
    Comment on ballengerb1's post
    The receiver they sent is same as old one. Was using the wall switch for a while to turn on as battery seemed to be going out on remote.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #5

    Feb 6, 2011, 12:12 PM

    After the new battery if you still have trouble confirm power going into and out of the wall switch. If you have power but still no fan just come back and tell us
    melbell26's Avatar
    melbell26 Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Feb 6, 2011, 12:16 PM
    Comment on ballengerb1's post
    Thank you, appreciate it
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton Bay fan light not working [ 5 Answers ]

The circular fluorescent light on my Hampton Bay ceiling fan has failed to come on. I took out the old light tube and it appeared to have been "blown," so I replaced it with a new tube. The light still does not come on, though the fan itself works fine. Any ideas?

Hampton Bay fan not working [ 1 Answers ]

I have a Hampton Bay Windward 2 fan (with remote). One day as the light was on, it died out. As it was Autumn, the fan was not on. I changed the bulb and noticed I had no power to the fan (no light or fan rotation). What might be the problem and how should I handle it? Do I need to take it...

Hampton bay fan replacing the remote and receiver [ 1 Answers ]

I have a hampton bay fan with the light model redington ii by pinnacle and the receiver in thisfan is round and the replacement given to me by home depot is rectangular. On the receiver there is a white and black wire on one side and a upper light, lower light, motor black, and motor white wire on...

Hampton Bay Fan just stopped working [ 3 Answers ]

Power to the house went out. The fan no longer works. I checked the wall switch and it seems fine. What could go wrong with a fan?

View more questions Search