Ask Experts Questions for FREE Help !
Ask
    jnance's Avatar
    jnance Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2008, 05:34 AM
    Hampton Bay fan not working
    I have a Hampton Bay Windward 2 fan (with remote). One day as the light was on, it died out. As it was Autumn, the fan was not on. I changed the bulb and noticed I had no power to the fan (no light or fan rotation). What might be the problem and how should I handle it? Do I need to take it back to the Depot?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Nov 25, 2008, 12:02 PM

    Probably a bad receiver. Take it back if you bought it recently.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Fan just stopped working [ 3 Answers ]

Power to the house went out. The fan no longer works. I checked the wall switch and it seems fine. What could go wrong with a fan?

Hampton Bay fan/light not working! [ 8 Answers ]

Hi, I tried searching on this board for answers and couldn't find one. We have a hampton bay ceiling fan/light with pull chains and remote. The item code is: 52-RDT The way it's set up is we have 2 switches on the wall that turn on ceiling lights and the other is used to turn the ceiling fan on....

Hampton Bay ceiling fan not working [ 4 Answers ]

I replaced an existing chandler with a Hampton Bay ceiling fan/light. The chandler worked fine and was controlled by a "middle of the run" wall light switch. The ceiling fan and lights have never worked. I plan to operate the ceiling fan and lights using the pull chains a not via a remote. I...

Hampton Bay Fan Remote Not Working [ 2 Answers ]

:) Hi, I purchased a fan less than a year ago and the sensor on the remote seems to have gotten some kind of glitch. The little red sensor light stays on continuously, instead of going out after pressing a function. When I shut off the fan, and go to put the remote down, it starts up in high...

Hampton Bay fan stopped working [ 1 Answers ]

Hi, I have had a Hampton Bay fan for about a year now and it's been great. This morning it was not running. When I turned the light on, they both flashed and continued to do so. I put new batteries in the remote and it sill won't turn. It is a Windward III Model 740 183. Any ideas? ...

View more questions Search