Check out some similar questions!
Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks
[ 3 Answers ]
I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.
Moncrief furnace
[ 1 Answers ]
How to rewire a moncrief furnace fan module I don't have a wire diagram
Furnace ignites but blower won't start till furnace shuts down.
[ 7 Answers ]
(Nordyne/Miller G3RA)-I have a furnace HSI(glow plug) that will ignite and burn until it gets too hot and shuts down. As soon as the furnace shuts down the blower starts to circulate air. The blower circulating air cools the furnace and it reignites.Shortly after the furnace ignites the blower...
Furnace not heating the house. Damper on the furnace not opening. Motor then shuts.
[ 4 Answers ]
My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:
30 yr old MONCRIEF hanging garage furnace
[ 4 Answers ]
I am looking for a reset button with thermocouple outlet in the side for old moncrief garage hanging heater. Have taken apart a wire is loose I used to be able to hit reset to start but this year nothing REPLACEMENT AVAILABLE? View more questions Search
Add your answer here.
|