Ask Experts Questions for FREE Help !
Ask
    joey gthe18's Avatar
    joey gthe18 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2009, 02:38 PM
    Moncrief furnace
    How to rewire a moncrief furnace fan module I don't have a wire diagram
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 16, 2009, 09:40 PM
    Post picture. Moncrief is just a york furnace but we need to know what the fan mod looks like OR post the brand of mod and part number and I will see if I can locate it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Stellar Furnace Heating up Furnace Room to 110 Degress? [ 2 Answers ]

I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

30 yr old MONCRIEF hanging garage furnace [ 4 Answers ]

I am looking for a reset button with thermocouple outlet in the side for old moncrief garage hanging heater. Have taken apart a wire is loose I used to be able to hit reset to start but this year nothing REPLACEMENT AVAILABLE?

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search