Ask Experts Questions for FREE Help !
Ask
    barela1's Avatar
    barela1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2011, 12:29 PM
    Cumberland gas furnace
    Cumberland gas furnace Model FUAB100A4081 will operate properly for a period (several hours to several days) the furnace will then not light and the fan will remain on pushing cold air into the home. The igniter along with the flame sensor have been replaced. The problem still exists
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Feb 4, 2011, 06:26 PM
    Did you check the control board for fault codes when the furnace will not relight?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Cumberland heat pump [ 2 Answers ]

Cumberland Model RHPA0251AAA3 THE REST OF THE TAG IS MISSING DOES ANYONE HAVE THE SPEC. This unit sat in 2 inches of water and they are telling me it need replaced... I thought they were made to get wet

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 1 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it's just the burners that turns off after a few seconds. If I try turning the furnace on and off a few times it sometimes fires up and stays on. I have tried...

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 0 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it just the burners that turns off. If I try turning the furnace on and off a few times it sometimes fires up and stays on.

Carrier Natural Gas Furnace main gas valve will not open every call for heat [ 1 Answers ]

We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:

View more questions Search